Products in "Stepper Motors" category at AllElectronics.com http://www.allelectronics.com/?page=rss&action=category_products&id=17509 Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR WITH GEARHEAD http://www.allelectronics.com/make-a-store/item/SMT-94/STEPPER-MOTOR-WITH-GEARHEAD//1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR WITH GEARHEAD Japan Servo Type KP56LM2G-001 stepping motor on a 4.46" x 2.22" x 1" gear-box. Final drive shaft is on the same side of the gearbox as the motor. Motor is 3.3Vdc, 2.2A/ phase, 1.8 degree stepper with six leads. An electromagnetic brake is attached to the back of the motor and requires 24Vdc to release. It can be easily removed if not required. Motor has standard 2.22" square mounting plate with mounting holes in four corners. Overall depth of assembly including gearbox and brake is 4.18."

Our Price: $15.35

]]> STEPPER MOTOR W/ SCREW MECHANISM http://www.allelectronics.com/make-a-store/item/SMT-102/STEPPER-MOTOR-W/SCREW-MECHANISM/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR W/ SCREW MECHANISM Minebea "Astrosyn" #17BB-H132-11. 4-wire motor with 1/4" diameter x 1" long linear screw shaft and plastic nut that rides up and down the screw. 12Vdc, 75 Ohm. 1.72" diameter x 0.89" body with mounting flange. Holes on 1.95" centers.

Our Price: $2.75

]]> STEPPER MOTOR W/ GEARS http://www.allelectronics.com/make-a-store/item/SMT-107/STEPPER-MOTOR-W/GEARS/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR W/ GEARS Japan Servo Motor# KH42JM2-038. 6-pin connector, 1.8 Degree/ step motor attached to a gear train with eight single and compound gears. Motor is 42mm square (1.63") x 1.57" long with a 5mm diameter shaft with a brass gear attached. The gear train is 6" x 1.45" overall and is removable. Requires an 11-pin socket connector, 2mm pitch for connection.

Our Price: $10.00

]]> STEPPER MOTOR, 6-WIRE http://www.allelectronics.com/make-a-store/item/SMT-108/STEPPER-MOTOR-6-WIRE/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR, 6-WIRE Mabuchi # PF35T-48L4. Four phase, unipolar stepper motor with 6 leads. 3.6 Degree step angle. 20 Ohms. 7V, 350mA. 1.38" diameter x 0.59" long. Mounting flange has two holes on 1.68" centers. Dual shaft, 0.078" diameter. Brass gear on one side, 10 teeth, 0.25" diameter. 2.75" leads with socket connector.

Our Price: $3.25

]]> STEPPER MOTOR, 4-LEAD http://www.allelectronics.com/make-a-store/item/SMT-111/STEPPER-MOTOR-4-LEAD/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR, 4-LEAD Kollmorgen # PJT55-H1U-03. Voltage: 3.75 VDC, 2.5 degrees/step. Four conductor 18.5" cable terminated with .1" pitch connector. Body Dimensions: 56mm diameter x 56mm long. Dual flatted shaft, 0.25" diameter. Extends 37mm and 35mm.

Our Price: $8.50

]]> STEPPER MOTOR W/ GEAR HEAD http://www.allelectronics.com/make-a-store/item/SMT-115/STEPPER-MOTOR-W/GEAR-HEAD/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR W/ GEAR HEAD NPM (Nippon Pulse America) # PF55-48Q1G. 4-wire, bipolar stepper motor with 1/10 gearhead. 7.5 Deg per step, 48 steps per revolution. 6.75 Ohms per phase. 59.5 x 59.5 x 52mm long (excluding shaft). 6mm diameter x 23mm long flatted shaft. Four mounting screws on face of gearhead. Four 32" leads.

Our Price: $15.00

]]> 4-WIRE STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-112/4-WIRE-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 4-WIRE STEPPER MOTOR Mineba NMB-MAT # PM42L-048-UAJ9. 24V stepper motor. 48 steps per revolution, 7.5 Deg per step. 2-2 phase. 7 Ohm coils. 42mm diameter x 22mm long. 3mm diameter shaft with brass gear (9.5mm diameter, 16 cog). Four 7" leads.

Our Price: $2.50

]]> STEPPER MOTOR WITH GEARBELT AND PULLEYS http://www.allelectronics.com/make-a-store/item/SMT-110/STEPPER-MOTOR-WITH-GEARBELT-AND-PULLEYS/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR WITH GEARBELT AND PULLEYS Novatronics # 20M34R1-A. 5-wire stepper motor with 10 cog pulley attached to shaft. Includes a 14 cog nylon pulley with a 13/32" flatted bore and a 13" circumference cog belt (Gates 23E 09460). The motor is 2" diameter x 2.46" long. 1/4" diameter x 0.65" long shaft. Pulley is attached with set screw. Five 15" leads.

Our Price: $8.50

]]> STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-113/STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR Minebea-Matsushita# 23KM-K255-P1V. 56 x 56 x 42mm hybrid stepper motor. 1.8 degrees per step. 0.25" diameter shaft. Attached to the shaft is a machined aluminum widget that extends 1.05" beyond motor, threaded down the center. Four mounting holes on 1.86" centers. Detachable wire harness with four 4" wires.

Our Price: $8.00

]]> 16 WIRE STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-118/16-WIRE-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 16 WIRE STEPPER MOTOR Brand unknown - Made in Belgium# PD 12. Code number : 9904 112 12001. 3 Deg. 45' step angle. 175mA. 150 g/cm torque. 1.5" diameter x 2.48" long. 1.5" square mounting plate. 0.15" diameter x 0.40" long shaft. 16 leads, 11" long.

Our Price: $4.75

]]> 3.1 VDC STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-355/3.1-VDC-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 3.1 VDC STEPPER MOTOR Thomson Airpax Mechatronics # S42M048T52. 3.1Vdc, 3.6 Ohm, 7.5 Degree per step. 42mm diameter x 22mm. Four mounting holes on 36mm centers. Four 6" leads. Shaft - 3mm diameter x 11mm long. 13 tooth, 12mm diameter brass gear.

Our Price: $2.50

]]> 24V STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-356/24V-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 24V STEPPER MOTOR Portescap #S42L048S02-M5. 24V, 5 Ohm, 7.5 Degree per step. 42mm diameter x 22mm. Two mounting holes on 51mm centers. Four 3" leads. Shaft - 3mm diameter x 11mm long. 16 tooth, 9.75mm diameter brass gear.

Our Price: $2.50

]]> ROTARY STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-120/ROTARY-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 ROTARY STEPPER MOTOR Nippon Pulse #PF55-48D1. 55mm diameter x 25mm 5V unipolar stepper motor. 7.5 Degrees per step. 2-phase. 5 Ohms per phase. Shaft is 3mm in diameter x 4mm long with a small keyway on one side. Six 12" leads.

Our Price: $2.00

]]> 6-WIRE AIRPAX STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-123/6-WIRE-AIRPAX-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 6-WIRE AIRPAX STEPPER MOTOR Airpax # S-A83709-M4. 12 Volts, 0.4A / phase. 56mm diameter x 23mm thick. Mounting slots on 68mm centers. Six 4" leads. 0.25" diameter x 0.75" long shaft.

Our Price: $3.75

]]> STEPPER MOTOR WITH OPTICAL TACH http://www.allelectronics.com/make-a-store/item/SMT-122/STEPPER-MOTOR-WITH-OPTICAL-TACH/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR WITH OPTICAL TACH Warner Electric# SM-024-0065-RX, 4020-635-151. Stepper motor with optical tach/encoder, one pulse per revolution. Motor dimensions: 51mm diameter x 99mm long. 57 x 57 x 6.5mm mounting plate with four studs. 0.25" diameter x 1" long shaft. 24VDC, 2A per phase, 10 Ohms per phase. 45 oz/in torque. Optical encoder, removable, adds 1.75" to length of motor.

Our Price: $5.50

]]> 4-WIRE STEPPER MOTOR W/ GEARS http://www.allelectronics.com/make-a-store/item/SMT-125/4-WIRE-STEPPER-MOTOR-W/GEARS/1.html Fri, 10 Sep 2010 21:01:29 -0400 4-WIRE STEPPER MOTOR W/ GEARS Sanyo #B00224. 4-lead, 12Vdc stepper motor. 11.6 Ohm coils. 42mm diameter x 23mm body. Mounting flanges with holes on 50mm centers. 3mm diameter x 13mm long shaft. Prepped with 18mm diameter, 20 tooth gear. 8" leads.

Our Price: $2.50

]]> STEPPER MOTOR W/ SENSOR http://www.allelectronics.com/make-a-store/item/SMT-129/STEPPER-MOTOR-W/SENSOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 STEPPER MOTOR W/ SENSOR SMI (Servo Magnetics Inc) # 200-0019-01. 6-lead motor with 6-lead motion or position sensor. 36.5 x 36.5 x 48mm body. Sensor adds 11mm length to body. 5mm diameter x 14mm long shaft. Prepped with 10mm diameter cog pulley.

Our Price: $4.50

]]> PRINTER AUTOLOADER CONTROLLER, USED http://www.allelectronics.com/make-a-store/item/PCA-3/PRINTER-AUTOLOADER-CONTROLLER-USED/1.html Fri, 10 Sep 2010 21:01:29 -0400 PRINTER AUTOLOADER CONTROLLER, USED This assembly controlled three servo motors in a commercial photo printer. PC board contains three L6203 Full Bridge Drivers and a socketed microcontroller, AT89S51 24PC. Removed from used equipment. Included is the harness connecting the assembly to the servo motors. 5.32" x 2.60". See spec sheets for photo of board in use.

Our Price: $15.00

]]> 6-WIRE STEPPER http://www.allelectronics.com/make-a-store/item/SMT-358/6-WIRE-STEPPER/1.html Fri, 10 Sep 2010 21:01:29 -0400 6-WIRE STEPPER North American Philips Controls # 504-0004. 12 Volts, 8 Watt stepper motor. 2.25" diameter x 0.95". 0.25" diameter x 0.37" long shaft. 6" leads. Motors are unused, but discolored from storage conditions.

Our Price: $2.00

]]> 3-WIRE GEARED STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-360/3-WIRE-GEARED-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 3-WIRE GEARED STEPPER MOTOR North American Philips #KR45118-P8. 27V. 4W. 0-10Hz. 0-6 RPM CW rotation. 1.87" x 2.44" oval x 0.86". Flanges with mounting holes on 2" centers. 1/8" diameter flatted shaft, 0.39" long.

Our Price: $2.50

]]> GEAR REDUCTION STEPPER MOTOR http://www.allelectronics.com/make-a-store/item/SMT-359/GEAR-REDUCTION-STEPPER-MOTOR/1.html Fri, 10 Sep 2010 21:01:29 -0400 GEAR REDUCTION STEPPER MOTOR Japan Servo #KP48FP8G-504. 3:25 gear reduction. 7.5 Degrees per step. 24Vdc. 95 Ohms/phase. 6-wire motor. Body is 1.88" diameter x 1.03". L-shape mounting flange on one side, extended mounting tab on other side. 3/16" diameter shaft with a 0.62" diameter brass gear.

Our Price: $2.50

]]>