FirstPrevious • Showing page 1 of 1 (19 items found) • NextLast
Pages: 1
 
Sort Order:
12" 18/2 SPT-1 cooling fan cord terminates to bare leads. 45° angle socket fits all cooling fans equipped with solder / plug terminals. cULus. CAT# CFC-19
$1.55 each
Low Stock,
will ship if available
Quantity:  
Fits our CAT# CF-415 CAT# CFG-172
$1.60 each
Quantity:  
 
Run two fans with one cord. 12" wire between plugs. 45° plug fits all cooling fans equipped with solder / plug terminals. 24" lead wire. 2/18, SPT-1 zip cord. CAT# CFC-16
$6.50 each
Quantity:  
Fits all cooling fans equipped with solder / plug terminals. Bare leads. CAT# CFC-14
$1.75 each
Quantity:  
 
Run three fans with one cord. 12" wire between plugs. 45° plug fits all cooling fans equipped with solder / plug terminals. 24" lead wire. 2/18, SPT-1 zip cord. CAT# CFC-17
$7.50 each
Quantity:  
6' 18/2 SPT-1 cooling fan cord with polarized 2 prong plug. Right angle socket fits all cooling fans equipped with solder / plug terminals. CSA. CAT# CFC-15
$3.00 each
Quantity:  
 
Fan cord with a thermostatically controlled switch that turns AC fan on as ambient temperature approaches 88°F (-3/+5), turns off fan as ambient temperature moves below 80°F, cycle life 6,0... CAT# CFC-18
$9.95 each
Quantity:  
Rubber surround for 60mm fans. Fits snugly around fan casing, preventing lateral vibration. CAT# GST-60
$0.50 each
10 or more    $0.40 each
Quantity:  
 
CAT# CFG-120
$1.60 each
Quantity:  
Metal fan guard for 40mm square cooling fan. Fits our CAT# CF-599. CAT# CFG-40
$1.00 each
Quantity:  
 
CAT# CFG-60
$1.00 each
Quantity:  
CAT# CFG-80
$1.25 each
Quantity:  
 
Metal fan guard for 92mm square cooling fan. CAT# CFG-92
$1.00 each
Quantity:  
Good condition, slight discoloration. Perfectly functional metal fan guard. CAT# CFG-120U
$0.75 each
10 or more    $0.60 each
Quantity:  
 
Plastic guard, filter and retainer for 120mm fan. Foam filter can be removed and cleaned when necessary. CAT# FF-120
$3.60 each
Quantity:  
Plastic guard, filter and retainer for 60mm fan. Foam filter can be removed and cleaned when necessary. CAT# FF-60
$3.30 each
Quantity:  
 
Plastic guard, filter and retainer for 80mm fan. Foam filter can be removed and cleaned when necessary. CAT# FF-80
$3.45 each
Quantity:  
Plastic guard, filter and retainer for 92mm fan. Foam filter can be removed and cleaned when necessary. CAT# FF-92
$3.60 each
Quantity:  
 
Reduce cooling fan vibration and noise. These silicone mounts effectively decouple and absorb unwanted vibration. They press-fit into the mounting holes of most cooling fans. No case modification... CAT# RFM-1
4 for $1.00
Quantity:  
Minimum order of 4 pieces .
 
 
FirstPrevious • Showing page 1 of 1 (19 items found) • NextLast
Pages: 1
 
Sort Order: