FirstPrevious • Showing page 1 of 1 (18 items found) • NextLast
Pages: 1
 
Sort Order:
# 25 roller chain. Mates with 1/4" pitch, #25 chain sprockets. For master link, see CAT# ML-25 CAT# CHN-25
$2.50 ft
Quantity:  
For school science projects. Four sets of 1.58mm thick cardboard wheels. Four of each size, 25mm, 38mm, 51mm and 63mm diameters. 5mm hole in center of each wheel. White on front side, cardboard on ... CAT# CW-16
$2.25 set
New Item!
Quantity:  
 
KMC chain. 33.5" long, standard bicycle-type roller chain with 1/2" pitch (ANSI standard #40). 1/8" wide rollers. No master link. CAT# CHN-50
$1.50 each
Quantity:  
Timken Torrington Needle Bearing # NTA-1625. 39mm O.D., 25.5mm I.D., 2.0mm thick. CAT# BR-19
$1.00 each
Quantity:  
 
Four matched unbreakable plastic gears. The three larger gears are beveled on one side and can mesh at 90 degrees as well as the normal 180 degree angle. They have 5mm bores. Inserts are supplie... CAT# GR-86
$2.25 each
Quantity:  
42 tooth sprocket for #25 roller chain. 3.5" diameter. Attaches to 10mm (0.4") diameter half-moon shaft. 0.42" collar. CAT# GR-123
$2.00 each
Quantity:  
 
Steel axle. 12" long x 1/8" (3mm) diameter. CAT# AXL-12
$1.00 each
New Item!
Quantity:  
Velleman Kits # KNS7. Fun with gears and motors. Small 3 Vdc motor, metal bracket and axles, and an assortment of small plastic gears and collars to produce a gear train of various ratios. Note: ... CAT# GR-84
$11.95 each
This product is currently on Back Order and should be available after 02/23/17
 
12 x 18 x 16mm one-way needle bearing. Includes 12mm adapter for 8mm shaft with 10mm shank. CAT# BR-14
$2.00 each
10 or more    $1.50 each
Quantity:  
CAT# ML-25
$1.00 each
Quantity:  
 
0.1" diameter thick x 2.6" overall diameter. CAT# FT-3
2 for $1.00
Quantity:  
Minimum order of 2 pieces .
Experimenter's Delight - Removed from used assembly. A belt-driven slotted shaft that probably caused a piston to oscillate attached to an optical encoder. Rotates in one direction only. 50mm long ... CAT# ENC-1
$0.50 each
Quantity:  
 
For school science projects. A set of two front and two rear plastic model race car wheels. Rear wheels, 40mm diameter x 17mm wide. Front wheels 34mm diameter x 4.5mm wide. Accepts 3mm diameter axl... CAT# DWH-1
$3.75 set
New Item!
Quantity:  
For school science projects. Set of three red plastic pulleys, 50mm, 38mm, 25mm with 4mm hole. For axles see CAT#s AXL-12, AXL-25. CAT# PLY-3
$2.00 set
New Item!
Quantity:  
 
Five matched break-resistant plastic gears ranging from 0.44" diameter (10 teeth) to 2.02" (50 teeth). Gears are molded with 0.15" (4mm) bores and come with inserts which reduce the bore to 0.075" ... CAT# GR-5
$3.50 each
10 or more    $3.00 each
Quantity:  
Shaft diameter 8mm. Thread diameter 12mm. Thread length 79mm. Overall length 130mm. 9 threads per inch. CAT# SFT-11
$1.25 each
10 or more    $1.00 each
Quantity:  
 
Two 22-cog, 1.17" diameter nylon gears with 5.8" stainless steel axle. The 0.25" diameter axle is attached to one gear. The other end is flatted and mates with the other gear. CAT# GR-40
$1.00 each
Quantity:  
Set of two metal axles, 2.5" long x 1/8" diameter (63mm x 3mm). CAT# AXL-25
$0.50 pair
New Item!
Quantity:  
 
 
FirstPrevious • Showing page 1 of 1 (18 items found) • NextLast
Pages: 1
 
Sort Order: