ARDUINO PRO MINI 328, 3.3V/8MHZ

CAT# ARD-14
$9.95 each
10 or more $8.95 each
Quantity:  
 
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable however the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

Breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors!

Features:
· ATmega328 running at 8MHz with external resonator (0.5% tolerance)
· Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
· USB connection off board
· Dimensions: 0.7 x 1.3" (18 x 33mm)
· Weighs less than 2 grams!
· Supports auto-reset
· 3.3V regulator
· Max 150mA output
· Over current protected
· Reverse polarity protected
· DC input 3.3V up to 12V
· On board Power and Status LEDs
· Analog Pins: 8
· Digital I/Os: 14
Spec sheet available in PDF format.
There haven't been any reviews for this item, you may be the first one to write a review.

Customer Comments

There haven't been any reviews for this item, you may be the first one to write a review.