T 1 3/4 INFRARED LED, EMITTER

CAT# ILED-8
3 for $1.00
3 piece minimum order
100 to 999 $0.20 each
1000 or more $0.14 each
Quantity:  
 
T 1 3/4 EMITTER, clear lens.
Spec sheet available in PDF format.
Average Customer Review:  (8 Reviews) Write A Review

Customer Comments

Average Customer Review:  (8 Reviews) Write A Review

A customer from CORONA, CA US
Nice LED
The light pattern is hard-edged with a hotter center and outer ring. A diffuser in front of the array will help balance out the hot areas, though.

This is not a very long-range LED. Depending on the sensitivity of your imaging device, the 10-16 mW of radiant power produced by this LED may not be enough. A large array of these will help with the intensity and some experimentation will be necessary to find the right quantity that will provide the proper intensity.

Having a wavelength of 940nm fit my imaging sensor perfectly and is coupled with a 900nm sharp cut filter.

I would have liked a more powerful LED, but the wavelength was more important than power. Using a larger quantity of these LEDs in an array will make up for the low power output. At 20-33 cents per unit, I can live with the need to use a larger quantity in order to meet my wavelength requirements.


A customer from Iowa
Good stuff, maynard
I bought about a dozen of these to do a night vision webcam in my Parrot's cage. They're not as bright as I expected, but very good LED's--the ten I installed will (dimly) brighten up the camera's field of vision. Gonna get another 100 of them.
BTW, use 1.5 volts per LED but no more than 1.7 -- took me forever and 2 dead lights to figure out what that spec sheet was talking about. :D

A customer from FL
led a+
THIS IS GREAT FOR REPLACING IR REMOTES AND MORE!!!!!!!!!!!!!!!!!!!!!!!!

A customer from berkeley,ca
multitouch application
I used 88 of these to build a multitouch display. 11 strings of 8 each in serial with a 5ohm resistor across a 12V computer powersupply. You can see some photos here:

[http://www.instructables.com/id/EJIXKOEF3ER7VN5/]


By the way, I was very happy with how quick allelectronicscorp was to send me out some extras when my order of 100 came up a couple shy. +++

A customer from NORTH POTOMAC, MD US
IR leds GRATE FOR CHEEP NIGHTVISION
i took one of thos cvs disposible vid cams drilled 8 holes next to the lenz did a simple 1/0 mod to get rid of the HUD and made a kickass night vision camra