|
20' Cable. 1/4" mono phone plug to 3-pin XLR jack. As some customers have commented, the + and - , yellow and white leads are both soldered to the 1/4" plug tip. Depending on your application, you...
CAT# CB-290
13 Available
$6.95 each
10
or more
$5.95 each
|
20' Cable. 3-pin XLR plug to 3-pin XLR jack. Nickel-plated zinc-alloy connectors. Fully Shielded low-loss cable. Flexible black rubber jacket.
CAT# CB-295
$8.50 each
10
or more
$7.50 each
|
|
|
Metal 1.42" x 1.05" mounting flange. Mounts in 0.94" diameter hole. Solder lugs.
CAT# MIKE-3CF
$2.00 each
10
to 99
$1.75 each
100
or more
$1.50 each
|
CAT# MIKE-3F
$2.50 each
10
to 99
$2.35 each
100
or more
$2.00 each
|
|
|
CAT# MIKE-3M
$2.00 each
10
to 99
$1.80 each
100
or more
$1.60 each
|
Metal 1.41" x 0.86" mounting flange. Mounts in 0.75" diameter hole. Solder lugs.
CAT# MIKE-3CM
$1.75 each
10
to 99
$1.50 each
100
or more
$1.25 each
|
|
|
Neutrik #NC3FXCC. 3-pole female XLR cable connector.
CAT# XLR-NC3FX
14 Available
$3.00 each
10
to 24
$2.85 each
25
or more
$2.65 each
|
Switchcraft B3F. Mounts with spanner nut from front of panels up to 0.4375 inches thick. Slot in threaded part of housing permits non-turn mounting. Requires 1.25 inch diameter minimum mounting hol...
CAT# SWC-B3F
$9.95 each
|
|
|
Switchcraft # QGP362. Panel mount 3-conductor XLR female connector. Rectangular bezel, 1.44" x 1.06".
CAT# SWC-362
1 Available
$6.00 each
|
Switchcraft D3FBAU. Studio quality black 3-pin XLR female receptacle for panel or chassis mounting. Gold-plated contacts. Rectangular frame 1.44" x 1.06". Front mounts in 0.953" diameter hole. Ha...
CAT# SWC-D3FB
9 Available
$6.50 each
|
|
|
Switchcraft QGP-363. 3-pin male XLR receptacle for panel or chassis mounting. Rectangular frame, 1.44" x 0.87". Front-mounts in 0.76" hole.
CAT# SWC-D3M
27 Available
$1.75 each
|
Switchcraft D3MBAU. Studio quality black 3-pin XLR male receptacle for panel or chassis mounting. Gold-plated contacts. Rectangular frame, 1.44" x 0.87". Front-mounts in 0.76" hole.
CAT# SWC-D3MB
137 Available
$2.75 each
|
|
|
Switchcraft #QGP363. Gold-plated pins. Rectangular frame, 1.44" x 0.87". Front-mounts in 0.76" hole.
CAT# SWC-363
18 Available
$2.25 each
|
Switchcraft # TA3FX. Miniature XLR cable mount connector, 0.413" o.d. Ideal for use with slim lavaliere microphones and instrumentation using shielded or unshielded cables. Positive latch locking s...
CAT# SWC-TA3F
$5.00 each
|
|
|
Neutrik NC3FAH. 3 pole female XLR panel-mount receptacle, grounding: without ground/shell contact, horizontal PCB mount, Retention spring instead of latch. Gold-plated pc pins.
CAT# XLR-3FC
$0.65 each
100
or more
$0.50 each
|
Neutrik # NC3MRC. 3-pole male XLR cable connector. Right-angle.
CAT# XLR-3MRC
$6.25 each
|
|
|
Neutrik# NC3MD L-B-1. Black, chassis mount XLR male connector.
CAT# XLR-3MDB
$2.00 each
|
Neutrik NC3MAH. 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount. Gold-plated pc pins.
CAT# XLR-3MC
$0.85 each
100
or more
$0.65 each
|
|
|
Neutrik #NC3FAV. 3-pole XLR female with latch, chassis mount connector. Vertical mount. Gold-plated pc pins. Mounting holes on 30mm diagonal centers.
CAT# XLR-3FAV
10 Available
$1.00 each
10
or more
$0.85 each
|
Switchcraft # A3MB. Black metal 3-pole male XLR cable mount connector.
CAT# SWC-A3MB
70 Available
$3.00 each
|
|
|
Neutrik #NC3FX-HD. 3-pin "Heavy duty" XLR cable connector for outdoor use. All metal, stainless steel design. Dust and water protected when mated with NCMX-HD. Chuck type strain relief system for s...
CAT# XLR-3FXHD
$4.00 each
|
Alcatel AC3FI. 3-pole female XLR, in-line cable mount connector.
CAT# XLR-3FI
$3.00 each
|
|
|
Neutrik NC3FDM3-L-1. Universal D-size metal body XLR panel mount series. UL recognized component. 3 pole female receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes.
CAT# XLR-3FP
$2.75 each
|
Switchcraft. 3-pole female XLR cable mount connector. Heavy-duty.
CAT# SWC-3FC
$4.75 each
|
|
|
Switchcraft # Y3FDPC. Chassis-mount female XLR. Metal shell. No latch mechanism. Threaded mounting holes on 1.25" centers. Straight pc pins.
CAT# SWC-3FD
$3.00 each
|
Neutrik # NC 3FK-V. Chassis-mount female XLR. Black plastic mounting shell. Vertical PC pins. Two mounting holes on 1.25" centers, M2.5 tapped thread. Panel thickness, 1-3mm.
CAT# XLR-3FK
$1.75 each
|
|
|
Neutrik # XLR-3FDB. Chassis-mount female XLR. Black zinc diecast mounting shell. Gold-plated solder-cup terminals. Two counter-sunk mounting holes on 1.25" centers.
CAT# XLR-3FDB
$2.25 each
|
Switchcraft. 3-conductor female XLR connector for PC board mounting. Plastic body, 0.75" wide x 0.85" high. PC pins and four mounting holes on bottom of jack, 0.50" centers.
CAT# SWC-FRT
180 Available
$2.00 each
|
|
|
Switchcraft. 3-pole male XLR cable mount plug. Heavy-duty.
CAT# SWC-3MC
$4.00 each
|
Switchcraft #A4F. 4-conductor, female XLR cord connector. Satin-nickel, non-reflective finish. Removable insert. Standard cable clamp.
CAT# SWC-A4F
11 Available
$4.60 each
|
|
|
Cannon Australia. 4-pole XLR male chassis mount connector.
CAT# XLR-4MC
$5.00 each
|
Switchcraft heavy-duty XLR connector. 4-pin male XLR. Right-angle cable-mount.
CAT# SWC-4MRT
$11.00 each
|
|
|
Switchcraft # TA4FX. Miniature XLR cable mount connector, 0.413" o.d. Ideal for use with slim lavaliere microphones and instrumentation using shielded or unshielded cables. Positive latch locking s...
CAT# SWC-TA4FX
38 Available
$5.00 each
|
Switchcraft # TA4MX. Miniature XLR cable mount connector, 0.413" o.d. Ideal for use with slim lavaliere microphones and instrumentation using shielded or unshielded cables. Positive latch locking ...
CAT# SWC-TA4MX
117 Available
$5.00 each
|
|
|
Switchcraft# A4FB. 4-pin female, in-line cable connector.
CAT# SWC-A4FB
$4.75 each
|
Neutrik NC4FP-1. 4-pin female chassis mount connector.
CAT# XLR-4FP
$4.50 each
|
|
|
4-pin female. In-line XLR connector. 0.25" cable opening.
CAT# XLR-405
$4.60 each
|
Alcatel. Black metal 4-conductor XLR female chassis mount connector. Latch-lock. Solder terminals.
CAT# XLR-4CFB
2 Available
$5.50 each
|
|
|
4-pin male. In-line XLR connector. 0.25" cable opening.
CAT# XLR-404
$4.00 each
|
4-pin male. Chassis mount XLR connector. 0.75" mounting hole.
CAT# XLR-402
$4.00 each
|
|
|
Switchcraft # A4F. Sturdy, die-cast zinc construction with satin nickel finish. High impact, molded thermoplastic insert insulation delivers high dielectric strength and superior insulation resista...
CAT# SWC-4F
$4.90 each
|
Neutrik NC5FP-1. Satin finish, Counter-sunk mounting holes. Silver solder cup terminals.
CAT# XLR-5FPB
$3.75 each
|
|
|
Neutrik # NC5FRX-B. 5-pole female XLR cable connector. Gold contacts. Black metal housing. Right-angle.
CAT# XLR-5FRXB
$8.50 each
|
Neutrik #NC5FX-B. 5-pole female cable connector, black metal housing, gold contacts.
CAT# XLR-5FXB
$4.00 each
|
|
|
Switchcraft A5FBX-A. The original A Series premium XLR connector with adjustable dual pressure plate cable clamp - flexible strain relief - and removable pin insert. Black shell.
CAT# SWC-A5FBX
$6.00 each
|
Alcatel. 5-pin, chassis mount XLR male.
CAT# XLR-502
265 Available
$5.50 each
|
|
|
Switchcraft # D5FBAU. 5-pole XLR female. Chassis mount. Black.
CAT# SWC-5FB
$4.75 each
|
Neutrik # NC6MSX. 6-pole male "industry standard" XLR cable connector. Easy to assemble with only 4 parts and no screws. Compact design with sturdy zinc diecast shell, fibreglass reinforced hard pl...
CAT# DIN-6MX
5 Available
$4.00 each
|
|
|
Neutrik# NC6FX. 6-pin female in-line cable connector.
CAT# XLR-6FX
$4.00 each
|
Neutrik # NC6FSP-1. Black, chassis mount XLR female connector.
CAT# XLR-6FS
$4.75 each
|
|
0 items, $0.00 
Customer Service: 818-904-0524 | Toll Free Order Line: 1-888-826-5432
