|
4.4" x 2.4" x 1.2" black ABS case with countersunk lid secured with self-tapping screws. Slots for mounting pc boards.
CAT# 1591-BSBK
$4.30 each
10
or more
$4.10 each
|
Hammond Mfg. Series 1591. Good-looking polycarbonate project enclosures in translucent, jewel-like blue. 4.72" x 2.55" x 1.57" high. Ideal for applications where parts need to be visible. Lap join...
CAT# 1591-CTBU
14 Available
$9.25 each
|
|
|
Hammond Mfg. Series 1591. Good-looking, clear, polycarbonate project enclosure. 4.72" x 2.55" x 1.57" high. Ideal for applications where parts need to be visible. Lap joint construction provides p...
CAT# 1591-CTCL
13 Available
$9.25 each
|
Hammond Mfg. Series 1591. Good-looking polycarbonate project enclosures in translucent, jewel-like red. 4.72" x 2.55" x 1.57" high. Ideal for applications where parts need to be visible. Lap joint...
CAT# 1591-CTRD
11 Available
$7.50 each
|
|
|
2.51" x 1.73" x 1.25" black ABS plastic project enclosure. Interlocking lid secured with self-tapping screws. Interior slots for pc boards. Includes hardware.
CAT# MB-131
$2.50 each
10
or more
$2.25 each
|
3.97" X 2.12" X 1.72" black ABS plastic project enclosure. Interlocking lid secured with self-tapping screws. Interior slots for pc boards. Includes hardware.
CAT# MB-132
$3.00 each
10
or more
$2.75 each
|
|
|
Black ABS plastic project enclosure. Interlocking lid secured with self-tapping screws. Interior slots for pc boards. Outside dimensions: 3.95" x 3.02" x 1.60" (102mm x 77mm 41mm). Includes hard...
CAT# MB-173
$3.00 each
10
or more
$2.65 each
|
Black ABS plastic project enclosure. Interlocking lid secured with self-tapping screws. Interior slots for pc boards. Outside dimensions: 5.30" x 2.93" x 1.93" (135mm x 75mm x 49mm). Included ha...
CAT# MB-113
$4.50 each
10
or more
$4.00 each
|
|
|
Diecast aluminum alloy chassis box with mounting flanges. Lap joint construction. Interior card slots. Self-adhesive gasket provides protection against dust and moisture. Overall length including m...
CAT# MBX-13
$13.00 each
This product is currently on Back Order and should be available after 06/13/13
|
Diecast aluminum alloy chassis box with mounting flanges. Lap joint construction. Interior card slots. Self-adhesive gasket provides protection against dust and moisture. Overall length including ...
CAT# MBX-25
$19.00 each
|
|
|
Diecast aluminum alloy chassis box with mounting flanges. Lap joint construction. Interior card slots. Self-adhesive gasket provides protection against dust and moisture. Overall length including m...
CAT# MBX-11
$39.00 each
|
Black ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-GBK
$1.90 each
|
|
|
2.36" x 1.38" x 0.8" black ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-HBK
$2.25 each
|
Black ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-KBK
$2.35 each
|
|
|
Hammond Manufacturing # 159BBBK. Outside dimensions 4.67" x 3.68" x 1.35". Diecast aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction ...
CAT# 1590-BBBK
$12.75 each
10
or more
$12.25 each
|
3.9" x 2.0" x 0.8" black ABS case with countersunk lid secured with self-tapping screws. Slots for mounting pc boards.
CAT# 1591-ASBK
$3.75 each
10
or more
$3.50 each
|
|
|
Hammond Mfg. 1593 series. 2.6" x 4.4" x 1.1" black ABS plastic cases with removable front panels and panel for battery compartment. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-QBK
$4.75 each
10
or more
$4.55 each
|
3.3" x 2.2" x 1.04" black ABS case with countersunk lid secured with self-tapping screws. Slots for mounting pc boards.
CAT# 1591-MSBK
$3.50 each
10
or more
$3.25 each
|
|
|
4.7" x 2.6" x 1.55" black ABS case with countersunk lid secured with self-tapping screws. Slots for mounting pc boards.
CAT# 1591-CSBK
$4.65 each
10
or more
$4.35 each
|
Hammond # 1593LBK. 2.6" x 1.06" x 3.59" black ABS plastic case with removable front panels. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-LBK
$4.25 each
10
or more
$3.90 each
|
|
|
Desktop ABS instrument case with molded PCB stand-off, vertical card guide for repetitive assembly or disassembly. Two M3 screws are provided. Light grey top and base with black panels. 5.51" long ...
CAT# MBD-738
23 Available
$7.15 each
10
or more
$6.95 each
|
Hammond Manufacturing# 1590B. Outside dimensions 4.39" X 2.34" X 1.23". Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides pr...
CAT# 1590-B
$8.40 each
10
or more
$7.90 each
|
|
|
Hammond Manufacturing # 1590BB. Outside dimensions 4.67" x 3.68" x 1.33". Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides ...
CAT# 1590-BB
$11.00 each
10
or more
$10.50 each
|
Hammond Manufacturing # 1590LB. Outside dimensions 1.99" x 1.99" x 1.23". Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides ...
CAT# 1590-LB
$7.25 each
10
or more
$6.80 each
|
|
|
Hammond Manufacturing # 1590A. Outside dimensions 3.64" x 1.52" x 1.23". Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides p...
CAT# 1590-A
$7.05 each
10
or more
$6.65 each
|
Gray ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-GGY
$1.90 each
|
|
|
Gray ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-HGY
$2.25 each
|
3.15" x 1.57" x 0.8" gray ABS plastic with interlocking lid. Integral standoffs for pc board mounting. Lid held in place with self-tapping #4 screws (included).
CAT# 1551-KGY
$2.35 each
|
|
|
Gray ABS plastic. Two piece tongue and groove construction. 0.064" brushed aluminum front and rear panels. Integral pc standoffs. Front and rear vertical pc board guides. 5.26" x 5.3" x 2".
CAT# 1598-BSGY
$10.00 each
10
or more
$9.60 each
|
Gray ABS plastic. Two piece tongue and groove construction. 0.064" brushed aluminum front and rear panels. Integral pc standoffs. Front and rear vertical pc board guides. 6.1" x 3.65" x 1.36".
CAT# 1598-ASGY
$9.10 each
10
or more
$8.50 each
|
|
|
Black ABS plastic project box, 1.46" x 1.06" x 0.67" high. Bottom snap-fits tightly into place. 0.71" x 0.22" slot in one side of box.
CAT# MB-95
$1.25 each
10
or more
$1.10 each
|
2.7" x 1.7" x 1.2" H heavy-duty 3/32" molded plastic box with aluminum cover. Built in stand-offs for P.C. or perf boards. Each case has brushed aluminum cover and screws.
CAT# TB-1
$1.90 each
10
or more
$1.75 each
|
|
|
3.3" x 2.1" x 1.4" H heavy-duty 3/32" molded plastic box with aluminum cover. Built in stand-offs for P.C. or perf boards. Each case has brushed aluminum cover and screws.
CAT# TB-2
$2.25 each
10
or more
$2.10 each
This product is currently on Back Order and should be available after 06/27/13
|
4.2" x 2.7" x 1.6" H heavy-duty 3/32" molded plastic box with aluminum cover. Built in stand-offs for P.C. or perf boards. Each case has brushed aluminum cover and screws.
CAT# TB-3
$2.75 each
10
or more
$2.50 each
|
|
|
5.3" x 3.3" x 1.6" H heavy-duty 3/32" molded plastic box with aluminum cover. Built in stand-offs for P.C. or perf boards. Each case has brushed aluminum cover and screws.
CAT# TB-4
$3.50 each
10
or more
$3.20 each
|
2.92" x 1.93" x 1.1" interior dimensions. Black ABS plastic enclosure, 0.06" thick.
CAT# MB-104
$0.60 each
100
or more
$0.45 each
|
|
|
Hammond Mfg. 1593 series. 2.6" x 5.45" x 1.1" black ABS plastic cases with removable front panels and panel for battery compartment. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-YBK
$5.10 each
10
or more
$4.85 each
|
High-impact ABS plastic utility boxes. Black textured finish. Interlocking lid held in place with screws. Interior card guides for 1.6mm thick pc board. Mounting flange has counter-sunk screw h...
CAT# MBF-24
$5.45 each
|
|
|
Black ABS plastic project box, 2.1" x 1.61" x 0.89." Mounting ears with holes on 2.6" centers. Bottom and one (long) side of box are separate pieces that snap-fit tightly into place.
CAT# MB-96
$1.55 each
10
or more
$1.35 each
|
High-impact ABS plastic utility boxes. Black textured finish. Interlocking lid held in place with screws. Interior card guides for 1.6mm thick pc board. Mounting flange has counter-sunk screw h...
CAT# MBF-20
$2.75 each
|
|
|
High-impact ABS plastic utility boxes. Black textured finish. Interlocking lid held in place with screws. Interior card guides for 1.6mm thick pc board. Mounting flange has counter-sunk screw h...
CAT# MBF-22
$3.50 each
|
Black ABS plastic project box, 3.56" x 1.5" x 1.2." Mounting ears with holes on 3.9" centers. Bottom snap-fits tightly into place. There is a small rectangular hole, 0.25" x 0.43" near the botto...
CAT# MB-97
$1.95 each
10
or more
$1.70 each
|
|
|
Hammond Mfg. 1593 series. 2.6" x 3.6" x 0.83" black ABS plastic cases with removable front panels and panel for battery compartment. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-SBK
$4.10 each
10
or more
$3.85 each
|
Hammond Mfg. 1593 series. 2.6" x 3.54" x 1.1" black ABS plastic cases with removable front panels and panel for battery compartment. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-PBK
$4.15 each
10
or more
$3.95 each
|
|
|
Hammond Mfg. 1593 series. 2.6" x 4.35" x 0.83" black ABS plastic cases with removable front panels and panel for battery compartment. Integral pc board standoffs. Includes self-tapping screws.
CAT# 1593-TBK
$4.50 each
10
or more
$4.30 each
|
High impact UL-94-HB ABS. Lid and base are molded in light grey color, front and end panels are molded in dark grey color. Snap-in type design to save time in product assembly. 6.10" long x 3.62" w...
CAT# MBS-816
20 Available
$5.85 each
10
or more
$5.65 each
|
|
|
High impact UL-94-HB ABS. Lid and base are molded in light grey color, front and end panels are molded in dark grey color. Snap-in type design to save time in product assembly. 7.88" long x 4.76" w...
CAT# MBS-818
24 Available
$6.95 each
10
or more
$6.75 each
|
Flame retardant ABS UL94-VO. Designed for electronic product use. Four screws. 2.74" long x 1.99" wide x 0.83" high.
CAT# MBU-906
$3.00 each
10
or more
$2.85 each
|
|
0 items, $0.00 
Customer Service: 818-904-0524 | Toll Free Order Line: 1-888-826-5432
