Chrysler left-hand window-lift motor. 12 Vdc, 3.5A, 88RPM (no load). Powerful, right-angle worm-gear drive. 18mm diameter gear on 47mm turntable rotates around 8mm shaft. Center shaft is stationar... CAT# DCM-565

Chrysler right-hand window-lift motor. 12 Vdc, 3.5A, 88RPM (no load). Powerful, right-angle worm-gear drive. 18mm diameter gear on 47mm turntable rotates around 8mm shaft. Center shaft is station... CAT# DCM-572

33JPF-15380-50. Quality 12 Vdc gearmotor runs 85rpm @ 42mA (no-load), but has input voltage range from 2 - 20vdc. At 12vdc draws about 160ma typical under load. Overall length excluding shaft - 50m... CAT# DCM-417

Buehler #1.61.046.503.06. No load ratings: 110 RPM @12Vdc/90mA. 250 RPM @ 24Vdc/90 mA. Overall length, excluding shaft, 75mm. Gear head diameter, 35mm. Flatted shaft, 5mm diameter x 19mm long with ... CAT# DCM-441

No-load rating: 180 RPM @ 12Vdc / 1.3A. Overall length, 144mm (5.66"). Motor diameter, 49mm (1.91"). 12mm diameter worm shaft is 89mm (3.55") long. The last 12mm of the shaft has a 6 x 1.0 reverse ... CAT# DCM-563

No-load rating: 180 RPM @ 12Vdc / 1.3A. Overall length, 144mm (5.66"). Motor diameter, 49mm (1.91"). 12mm diameter worm shaft is 89mm (3.55") long. The last 12mm of the shaft has a 6 x 1.0 reverse ... CAT# DCM-697

Relatively powerful, low-current DC motor and gearbox with a 4.9" diameter plastic (nylon?) turntable with a rubber o-ring circumference that could be used to drive another wheel. Turntable can be ... CAT# DCM-351

Source Engineering, Inc. 37JB270G (gear), 32ZYT30 (motor). No-load spec: 25 RPM @ 24Vdc, <60mA. Torque: 0.94Nm @ < 300mA. Gear ratio: 270:1. 37mm diameter gearbox. 32mm diameter motor. 57mm length... CAT# DCM-404

Quality gear motor removed from working equipment. 30mm diameter x 47mm long motor. 35mm diameter x 28.5mm long gear head. 4mm diameter x 19mm long shaft with nylon worm gear attached. 120mm pi... CAT# DCM-419

DC gear motor. 33mm diameter x 25mm (1.28" x 0.99"). 5mm (0.20") diameter shaft flatted on two sides. No-load rating: 70 RPM @ 3Vdc, 80mA.Mounting holes on 38mm centers. 5" leads. CAT# DCM-428

Compact DC gearhead motor. Operates smoothly from 3-12Vdc. 60RPM @ 6Vdc, 110mA (no-load rating). Overall length, 53mm. Diameter of gearhead, 33mm. 5mm diameter x 12mm long flatted shaft. Three tapp... CAT# DCM-702

Timing-style gear motor, removed from working equipment in good condition. Operates over a 3-20Vdc range, approximately 20ma @ 3Vdc, 80ma @ 20Vdc. 176RPM @ 12Vdc. Pear-shaped gear box, 65 x 49mm, t... CAT# DCM-395

ESCAP B24.0, manufactured by Portescap. Miniature Swiss precision reversible motor 22C11.210-5 fitted with 20:1 ratio 12 stage gearbox. Body: 55mm long x 24mm diameter. 2.95 mm diameter x 7mm flat... CAT# DCM-415

Buehler # 1.61.046.131.00. No-load Ratings: 62 RPM @ 12Vdc, 124 RPM @ 24Vdc. Overall length, 65mm. Gearbox diameter, 35mm. 5mm diameter x 26mm long flatted shaft. Three tapped mounting holes in gea... CAT# DCM-390

Power Electric Distribution 21267-000 Rev.B. 6 Vdc gear motor. No-load rating: 80 RPM @ 6 Vdc,110mA. Works well down to 1.5Vdc (12RPM). 61mm L x 20mm D. 4mm diameter x 11mm flatted shaft. 280mm lea... CAT# DCM-365

Compact, relatively powerful DC gear motor. 44 RPM @ 6Vdc/ 70mA (no-load rating). 40.0 x 28.5 x 48.5mm long (1.57" x 1.12" x 1.90"), excluding shaft. 3mm (1/8") diameter flatted shaft x 10mm long. ... CAT# DCM-401

12 Vdc motor-drive actuator for automotive door locks. Nylon plunger moves 0.75". Push or pull, depending on polarity. Includes mounting hardware and a 10" metal extension rod which fits through... CAT# DLA-1

Mates with Faulhaber 2342 and similar motors with four mounting holes on 26mm centers and an 11mm dia. mating gear with 18 teeth. Gearbox dimensions:32mm x 32mm x 25mm. 6mm dia. shaft is 35mm lon... CAT# GH-2

12Vdc push/pull actuator for auto fuel door. 12mm (.47") push or pull depending on polarity. Nylon housing and plunger. Housing dimensions 43 x 59 x 29mm (1.68" x 2.33" x 1.15"). Two mounting holes... CAT# DLA-3

Maxon A-max. Very efficient, Swiss-made gear motor. 12-24Vdc operation. No-load specs: 50 RPM @ 12Vdc, 3.5mA. 22mm diameter motor. 24mm diameter gear head. 49mm long, excluding shaft and bushing.... CAT# DCM-418

FAULHABER #1624 motor, 16/5 (22:1) gearhead. Swiss-made precision gear motor. Small, powerful-for-its-size, very-low current. No-load Ratings: 320 RPM @ 12Vdc/ 2.5mA. 545 RPM @ 20Vdc / 3.9mA. 17m... CAT# DCM-705

Pittman # GM8712F191 / PM3662. 96:1 gear ratio. Rated 19.1Vdc. 80 RPM @ 19vdc, 100mA (no-load). 56 RPM @ 12Vdc (no-load). 35mm diameter gearhead. 30mm diameter motor. Overall length of motor and ... CAT# DCM-518