SOLDERABLE PERF BOARD, LINE PATTERN

This board is excellent. I got it to do a prototype, and still use pieces of it for many of my projects. The traces are easy to cut with an x-acto knife and the board is easily cut with a hacksaw. This is a good buy. I recommend it highly.

I have built one-of-kind electronics projects for decades. Based on Mike's review I used one of these boards and cut track with a Dremel tool. It really is a superior method for prototyping and even makes a very clean final product. You can place components far apart for experimenting and close together in the final. Best of all you can have as many pads as you need per component pin.

My favorite prototyping method is strip board aka veroboard. I like this line pattern format more than the 3 or 5 hole grouping as there are no restrictions about component placement. After doing circuit design, I simply cut to size and then put breaks in the strips with a drill (don't drill too deep). The best thing is that nothing can touch the price for this size.