Li-Polymer rechargeable cell. 72 x 40.3 x 8mm overall. Built-in charge control board with 10K NTC. Three 38mm leads with female connector (Molex 51021-0300 or equiv). Spec sheet available.
Spec sheet available in PDF format.
Customer Comments
laird stanton from ALEXANDRIA, VA USA
Cell Ballance
If used in SERIES, these cells MUST be ballanced during charge to prevent one cell going below 3v before the others. If any cell goes below 3v it will FAIL/may BURN/Burst. CAUTION ! ! ! Some charge these in a nomex bag in case of FIRE.
A customer from Great White North
Do NOT remove circuit
The circuit is a protection circuit, It protects the battery in case of a short, over charge, or over discharge. Extremes in any of the 3 will cause the battery to burst into flames. Remember the first Li-ions to hit the market were quickly recalled? The protection circuit is the "FIX" Please do not remove the circuit.
A customer from Sunny Jacksonville FL
3.7V 2650 MAH LI-ION BATTERY
This is a very nice battery pack Need to cut off the end connector to use the battery Also very easy to hack by taking the voltage protection board to use more than one battery in seres for higher voltages with that voltage protection board let say 12 volts
0 items, $0.00 
Add to Wishlist
Tell a Friend
Customer Service: