Cree XLamp(TM) 7090AMB. Extremely high-brightness white LED, capable of operating at 1 Watt and above. Long-life, solid-state, low-voltage and current light, ideal for architectural, landscaping, advertising and entertainment applications. The surface mount LED is mounted on a 0.80" diameter aluminum disk which serves as a heatsink and provides solder spots to simplify connection.Note: These are new parts. Because of their sensitivity to misuse, we cannot guarantee them after voltage has been applied.
38/ 62 Lumens @ 350/ 700 mA
100 degree viewing angle
Maximum forward voltage: 4 Vdc
Maximum forward current: 350/ 700 mA
Also available in red (CAT# LED-109), white (CAT# LED-110), green (CAT# LED-111) and blue (CAT# LED-112).
Customer Comments
A customer from ALBUQUERQUE, NM US
Maximum Forward Voltage for Amber is 3VDC
See p. 2 of the Spec sheet
A customer from Seattle, WA, USA
High brightness, wide-angle illumination
I use two of these to illuminate an RC model aircraft which I fly after dark. At 200 mA, no additional heatsinking is necessary and there is already plenty of light. The blue and green LED's drop about 3.2 V each at 200 mA, the red one drops about 2 V at 200 mA. At currents higher than about 300 mA, heatsinks are necessary, especially on green and blue LEDs
A customer from LOS ANGELES, CA US
nice
They are f'in bright, cant look at them directly. They are very nice for sign backlighting, or other small lighting jobs. I used 10 of them for backlighting a menu board. I used ((5V/8A, 3.3V/4A, 2.5V/2A POWER SUPPLY)) to power it, with some 3 watt sand resistors. These puppies need heat syncs to cool them off.
0 items, $0.00 
Add to Wishlist
Tell a Friend
Customer Service: