Wide viewing angle 5mm (T 1-3/4) White LED - water clear in off-state. 3000 mcd.
Spec sheet available in PDF format.
Average Customer Review:
(16 Reviews)
Customer Comments
Average Customer Review:
(16 Reviews)
A customer from East Troy WI
Mis Labeled?
The description says "wide viewing angle" but the spec sheet (pdf) says otherwise.
A customer from NYC,USA
Currently 25000mCd available
White LEDs are now currently more than 25000mCd intensity. This 3000mCd white LEDs are not used for lighting projects.
A customer from Palace of the Monkeys
great!
These are great! I bought FIVE!
A customer from Maryland
Model Railroad HO Scale Locomotive Headlight
This LED has made an excellent replacement for the factory installed lamp in HO Scale Locomotives. To keep it from illuminating the entire nose of the locomotive, a 3/4" long metal sleeve is "superglued" into the loco's shell, then the LED slid into that tube without glueing. With Digital Command Control (DCC), use the white wire for headlight, yellow wire for taillight and blue wire as the common. Put one resistor per LED, resisting temptation to use just a single resistor on the blue wire. Resistor value depends on your decoder, somewhere from 1.2K down to 47 ohms. For non-DCC they work great also. Have fun.
A customer from Hanover, PA US
Yes, these are bright as hell.
I purchased one about 2 years ago with a bunch of other LEDs for hobbyist purposes. Every now and then I build a circuit with a breadboard or BASIC Stamp homework board, and if the project calls for a status light, I pop this in there. It's hard to look straight into the light because it's nearly blinding.
• 1-5 of 16 •
Next Page
Customer Service: