12V LIGHTED PUSHBUTTON, 1" GREEN LENS

How does the switch and bulb assembly remove? I don't want to force anything but I don't see what I need to punch, poke or twist to remove that.

This is an over all nice switch. It operates kind of hard. But replace the switch with another of the same type,one that works with less force and it works nicely. The best thing about this switch is the transparent cover on the button is removeable. So you can use dry transfer lettering to designate what it does!When you have the lamp/switch assy out, pinch the white legs, and push up. After you remove the cap, there is a cover that is under the cap, tip the assembly and it falls out. But mark the top of the cover first, apply dry transfer lettering, replace the cover, then replace the cap. When putting it back together, you have to compress the spring with your fingers,Hold it while placing the assembly back into position. then put the lamp/switch assembly back and your done!
Take a good close look at the switch BEFORE you dis-assemble it, so you know how it goes back together.