Wire harness with two opto-switches. Each switch has a little spring-return pivot lever that momentarily opens the beam when activated. Switches can be snap-mounted into a 21mm wide cut-out. Each has three wire leads. Overall dimensions of switch body, not ncluding lever pivot is 16 x 22.5 x 9mm.
Customer Comments
A customer from Cheyenne, WY
nice little switches
blue wire is emitter led anode, red wire is output phototransistor collector, and black wire is common to emitter led cathode and output photo transistor emitter. emitter led forward voltage is about 1.17V @ 12ma, output phototransistor collector to emitter voltage is about 225mV when on @ 2 ma.