Shinano Kenshi # STP 58D3004. 56 x 56 x 54mm stepper. 1.8 Degree per step. 0.48 Ohm. Four mounting holes on 47mm centers. Four 4" wire leads prepped with 5-pin connector. 6.5mm (0.25") diameter shaft x 16mm long. 25mm diameter gear with 23 teeth.
Customer Comments
A customer from San Jose, CA USA
That Gear.
Don't think that there's a set screw to remove that gear. There is not. I had to cut it to get it off.
I think it's
A+ = yellow
A- = red
B+ = orange
B- = brown
Is this right? Anyone?
A customer from Frederick, MD USA
Here are more specks and a better price.
MFG: SHINANO KENSHI
P/N: STP-58D3004
COIL: .48ohm/1.6mH/3V/6A
TYPE: 2 Phase Uni-Polar 4 lead
Size 23, 1.8 Degree stepmotor. 1/4" dia. X 5/8" steel shaft with a 23 tooth 1" dia. steel gear. 4 mounting holes. 4" leads. Includes a matching pitch plastic 36 tooth,1-1/2"dia. gear for a 6mm shaft
Sq.: 55mm(Body) L: 54mm WT: 1.62
A customer from St Louis
specs
found the manf website and by process of elimination i found a spec sheet that looks pretty close to the specs given from AE.
http://www.shinano.com/motors/docs/SST41D.pdf
Mike Mensinger from Chicago
electrical ratings
No but for serious, can someone please post voltage rating and current and torque? maybe a data sheet? There's gotta be a data sheet.
jim shirkey from Florida
stepper
What are the ratings on this stepper regarding voltage and amperage. It should be on the side of the motor.
0 items, $0.00 
Add to Wishlist
Tell a Friend
Customer Service: