FirstPrevious • Showing page 2 of 2 (72 items found) • NextLast
Pages: 1 | 2
 
Sort Order:
AmetekĀ® PittmanĀ® # GM9234E992-R1. 5.9:1 ratio gear motor with 9" worm gear. Rated 24Vdc, the motor works well down to 6Vdc. Motor dimensions: 2.0" diameter (gear box) x 3.7" long. 9" long threade... CAT# DCM-483
$18.00 each
Quantity:  
Mates with Faulhaber 2342 and similar motors with four mounting holes on 26mm centers and an 11mm dia. mating gear with 18 teeth. Gearbox dimensions:32mm x 32mm x 25mm. 6mm dia. shaft is 35mm lon... CAT# GH-2
$2.00 each
Quantity:  
 
4.5 - 10 Vdc gear motor with a 2.75" diameter x 1" wide hard plastic wheel and rubber tire. Wheel can be attached to either side of motor. Motor with gearbox is 2.5" long x 0.75" x 0.9" not includ... CAT# AC-32
$3.75 each
Quantity:  
Tiny motor with offset weighted shaft. Designed to vibrate in mobile communications devices. Operate on 1.5-4.5Vdc. Rubber casing covers motor, but is easily removable. 15mm - length including... CAT# DCM-371
$1.25 each
10 to 99    $1.10 each
100 or more    $0.95 each
Quantity:  
 
HSI (Haydon Switch and Instrument). Reversible miniature gearhead motor. 3.6 RPM @ 20 Vac. 0.125" diameter x 0.30" long shaft. Motor is 1.07" diameter x 1.23" long. Four, 6" leads. Two leads for... CAT# ACM-336
133 Available
$4.50 each
Web Only!
Quantity:  
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes ... CAT# MD-57
$8.95 each
10 or more    $8.06 each
Quantity:  
 
Rubber mounting bushing for hobby servo motors like our CAT# DCS-110, DCS-108. Includes ten rubber bushings, grommets and screws. CAT# RB-40
$0.75 set of 10
Quantity:  
Japan Servo #U129A-128. Reversible 20 RPM, 115Vac, capacitor run, induction motor with gear head. Intermittent duty cycle: 0.05 Sec. on/ 2 Sec. off. Can be run for a few minutes before rest cycle... CAT# ACM-136
$6.50 each
Quantity:  
 
Powerful right-angle, worm-gear drive motor. The final drive mechanism rotates inside of the housing on the front of the motor and requires a 4mm square shaft. Motor body is 2.5" x 2.1" x 5.5" l... CAT# DCM-444
$14.00 each
Quantity:  
Spring-loaded servo horn designed to take the brunt of a large jolt so that your servo geartrain does not strip out. Recommended for any servo that repeatedly takes a beating. Mounting hardware not... CAT# SRV-1
$1.50 each
Quantity:  
 
Two N40 motors and 2 propellers (CW+CCW) Voltage: 3-6V Current: 0.3-1.68A Speed: 3V 26000RPM; 6V 42000RPM Shaft diameter: 1mm Motor Size: 0.95" x 0.47" x 0.39" Propeller Size: 2.95" x 0.24" CAT# DCM-499
$6.00 each
New Item!
Quantity:  
TowerPro SG92R 9g digital servo. POM with Carbon fiber gears. 180° rotation (90° each direction). Teflon bushing. Servo arms and screws included. Specifications: Weight: 9g Dimension:... CAT# DCS-118
$5.25 each
10 or more    $4.95 each
New Item!
Quantity:  
 
SM-S4303S. 60° rotation. Dimensions: 41.3 x 20.7 x 40.0mm high (1.60" x 0.79" x 1.58"). Torque: 4.4kg/cm (61.11oz/in) @ 6V. Speed: 0.18sec / 60°. Weight: 44.0g. 3-pin JR connector. CAT# DCS-109
$8.95 each
Quantity:  
DK Electronics V1.0. Arduino compatible motor shield. The board has two STMicroelectronics L293D Motor H-Bridge IC's which can drive up to 4 DC motors (or up to 2 stepper motors) with 0.6 A per bri... CAT# SMD-293
$6.95 each
Quantity:  
 
Seagate 73192-193MCCMAS. 45mm diameter x 20mm high stepper motor. 5mm diameter 10mm long shaft with aluminum bearing. 54mm mounting centers. Six 3" wire leads terminate to 6-pin socket. CAT# SMT-379
$0.75 each
10 or more    $0.60 each
Quantity:  
Molon # LMS-7300-3. 64mm diameter x 40mm stepper motor. 7.5 degree/step. Has an irregular shaped mounting plate, 86mm x 76mm overall dimensions. 4mm diameter x 15mm long shaft fitted with a 10mm m... CAT# SMT-380
2 Available
$3.00 each
Web Only!
Quantity:  
 
Includes our driver board, CAT# ME-16 and a 5-wire stepper motor that plugs directly into the board. Ideal for beginning robotics projects. Motor is a 4-phase, unipolar stepper, #28BYJ-48. CAT# ME-125
$5.35 set
Quantity:  
Dual H-Bridge driver using L298N chip. 5V logic. Operates on 5-35Vdc. 25W max power. 43 x 43 x 26mm. CAT# SMD-298
$5.95 each
Quantity:  
 
Uses a ULN2003 IC to drive a 4-phase unipolar stepper motor. Four LEDs indicate the status of the stepper. Jumper for 5V / 12V use. 5-contact header mates with connector on some standard stepper... CAT# ME-16
$2.50 each
Quantity:  
Based on the Allegro A4988 stepper driver chip, this board drives bi-polar stepper motors up to a max 2A/phase. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It... CAT# STMD-2
$19.95 each
Quantity:  
 
Sanyo Denki Type 103-591-0152 four wire stepper motor mounted on a 5" long metal assembly. 4.3 Ohm coils. 0.9 Degrees/Step. 43mm square body x 33mm long. Two 19mm diameter gears on an arm that,... CAT# SMT-370
$5.75 each
Quantity:  
Nichibo# LD5B-12160E-R-CE. Powerful, smooth-running vibrating motor with offset weight. Operates on 12Vdc @ 350ma/24Vdc @ 800mA. 27.5mm diameter x 38mm long body. Weight is 14mm diameter x 12mm... CAT# DCM-494
$1.50 each
10 to 119    $1.35 each
120 or more    $1.20 each
Quantity:  
 
 
FirstPrevious • Showing page 2 of 2 (72 items found) • NextLast
Pages: 1 | 2
 
Sort Order: