FirstPrevious • Showing page 1 of 1 (17 items found) • NextLast
Pages: 1
 
Sort Order:
No-load measurements: 520 RPM @ 12Vdc, 250mA. Works as low as 3Vdc (approx. 100RPM). Overall length, 57mm. Gearbox, 27mm diameter x 23mm long. Motor, 24mm diameter x 30mm long. Flatted shaft, 6mm d... CAT# DCM-475
$4.75 each
25 to 99    $3.75 each
100 or more    $3.50 each
Quantity:  
No-load rating: 180 RPM @ 12Vdc / 1.3A. Overall length, 144mm (5.66"). Motor diameter, 49mm (1.91"). 12mm diameter worm shaft is 89mm (3.55") long. The last 12mm of the shaft has a 6 x 1.0 reverse ... CAT# DCM-697
$13.95 each
Quantity:  
 
Relatively powerful, low-current DC motor and gearbox with a 4.9" diameter plastic (nylon?) turntable with a rubber o-ring circumference that could be used to drive another wheel. Turntable can be ... CAT# DCM-351
$9.75 each
Quantity:  
Relatively powerful, low-current DC motor and gearbox. Motor gearbox has a 5/16" diameter shaft that is flatted and splined. Specifications: 45RPM @ 24 Vdc, 60mA - operates at 12Vdc at 1/2 speed... CAT# DCM-469
$9.65 each
Quantity:  
 
Lots of power from this compact combination of 3-phase brushless DC motor and low-speed gear box. Heavy duty worm gear drive gearbox with grease fitting. 10mm square shaft is tapped with 5/16-18 ... CAT# DCM-473
$30.00 each
Quantity:  
Tiny motor and gear-driven propeller for model airplanes or propeller driven cars. Overall propeller length, 75mm. Motor, 7mm diameter x 26mm long. Approximately 5g. CAT# DCM-498
$4.75 each
New Item!
Quantity:  
 
Great foundation for a 4-wheel drive robotic vehicle. Four, independent DC gear driven motors, each with 2.75" diameter x 1" rubber tires on hard plastic wheels. 2-tier 0.2" thick acrylic chass... CAT# CC-18
$19.95 each
Quantity:  
New gear head motor prepped with an arm that rotates an offset axle in a 1" circle. Can be used to facilitate reciprocating action. Motor is 1.45"D x 3.00"L. No-load specs: 25RPM @ 6Vdc, 150mA. Pr... CAT# DCM-470
$4.75 each
10 to 99    $4.25 each
100 or more    $3.75 each
Quantity:  
 
Gear motor with 1/4" shaft. 40 RPM @ 12Vdc. 20 RPM @ 6Vdc. Gear box contains a micro switch that switches on briefly every revolution. 3.0" x 2.4" x 0.70" plastic gear box. Motor extends 0.90" ... CAT# DCM-493
$6.50 each
Quantity:  
Power Electric Distribution 21267-000 Rev.B. 6 Vdc gear motor. No-load rating: 80 RPM @ 6 Vdc,110mA. Works well down to 1.5Vdc (12RPM). 61mm L x 20mm D. 4mm diameter x 11mm flatted shaft. 280mm lea... CAT# DCM-365
$5.95 each
Quantity:  
 
Fairly powerful gearhead DC motor. 2.86" x 1.90" x 1.25" gear box with 5/16" diameter flatted shaft, 1.50" long. Motor is a Mabuchi RS555PC-3255. 1.46" diameter x 2.50" long. The gearhead reduce... CAT# DCM-490
$7.95 each
Quantity:  
Compact, relatively powerful DC gear motor. 44 RPM @ 6Vdc/ 70mA (no-load rating). 40.0 x 28.5 x 48.5mm long (1.57" x 1.12" x 1.90"), excluding shaft. 3mm (1/8") diameter flatted shaft x 10mm long. ... CAT# DCM-401
$4.95 each
10 or more    $4.50 each
Quantity:  
 
12 Vdc motor-drive actuator for automotive door locks. Nylon plunger moves 0.75". Push or pull, depending on polarity. Includes mounting hardware, metal strap and a 9.5" metal extension rod which f... CAT# DLA-1
$5.50 each
Quantity:  
AmetekĀ® PittmanĀ® # GM9234E992-R1. 5.9:1 ratio gear motor with 9" worm gear. Rated 24Vdc, the motor works well down to 6Vdc. Motor dimensions: 2.0" diameter (gear box) x 3.7" long. 9" long threade... CAT# DCM-483
$18.00 each
Quantity:  
 
Mates with Faulhaber 2342 and similar motors with four mounting holes on 26mm centers and an 11mm dia. mating gear with 18 teeth. Gearbox dimensions:32mm x 32mm x 25mm. 6mm dia. shaft is 35mm lon... CAT# GH-2
$2.00 each
Quantity:  
4.5 - 10 Vdc gear motor with a 2.75" diameter x 1" wide hard plastic wheel and rubber tire. Wheel can be attached to either side of motor. Motor with gearbox is 2.5" long x 0.75" x 0.9" not includ... CAT# AC-32
$4.75 each
10 or more    $4.50 each
Quantity:  
 
Powerful right-angle, worm-gear drive motor. The final drive mechanism rotates inside of the housing on the front of the motor and requires a 4mm square shaft. Motor body is 2.5" x 2.1" x 5.5" l... CAT# DCM-444
$14.00 each
Quantity:  
 
 
FirstPrevious • Showing page 1 of 1 (17 items found) • NextLast
Pages: 1
 
Sort Order: