Mating pair of polarized multi-pin connectors with wire leads. Pins on 2.5mm centers. Black nylon housing with release on male side of connector. Female side of connector can be snap-mounted into a rectangular chassis mounting hole. 10" color-coded leads, 22 AWG stranded wire on both connectors.
Customer Comments
A customer from DAYTON, OH USA
Worked Very Well!
I used the connector to charge 3 Li-ion batteries! I did not want to charge them in series! So I used this connector to break out each battery. On the work side I jumpered the pins together to give me the series voltage! At the charger I used two wire per battery charger! I used three chargers. This gave me better control of charging them! Just be careful on some of the connectors the pins were kind of exposed!