Category Index


CAT # MD-57

$8.95 each
10 + $8.06 each
+ Add to Wishlist
Product Description
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

· Power supply voltage: VM=15V max, VCC=2.7-5.5V
· Output current: Iout=1.2A(average) / 3.2A (peak)
· Standby control to save power
· CW/CCW/short brake/stop motor control modes
· Built-in thermal shutdown circuit and low voltage detecting circuit
· All pins of the TB6612FNG broken out to 0.1" spaced pins
· Filtering capacitors on both supply lines

Dimensions: 0.8x0.8"
Spec sheet available in PDF format.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
(This item was manufactured prior to August 31st, 2018)

Click to see Why is this here?
Customer Reviews

There are no reviews yet. Be first to Write a Review (requires login).

You might also like