Category Index

LED WALL WASHER, 120 VAC

CAT # TLP-250 (2 Reviews) Write a Review

Reduced Price
$3.35 each
Quantity:
+
+ Add to Wishlist
Product Description
Earthtronics Model TLP250K3X3.
120 VAC, 60Hz, 0.029A, 1.6W.
Color temperature: 5000K "Cool-white".
Nice-looking white plastic "wall washer-type" fixture. Operates on 120Vac house current. 30 bright white LEDs in a 2" x 2" array with diffuser lens. Inclines approximately 30° from mounting surface. Mounts with 2 screws on 2.35" centers. Removable 3.4" square frame hides screws. Mounts in 2.5" x 2.0" cut-out. 0.70" behind-mounting plane depth.
WARNING: May cause cancer or reproductive harm.
California Prop. 65
Why is this here?
Customer Reviews (2 Reviews)

Write a Review (requires login)

Very Nice light

Reviewer: from York, PA

This thing is fairly bright, more than what the pic shows. It'd illuminate a good size area. Not too hard to mount.

10 of 10 people found this review helpful. Do you? Yes No  Certified buyer

Great LED light!

Reviewer: from Kittery, Maine

I took this light apart and looked at the power supply. I checked the output voltage to the LEDS and these run about 91 volts DC. There's no step down transformer. I removed the diffuser lens and found 6 rows of 5 LEDS 4 row's in the back and at a 45 degree angle and the 2 front rows are soldered straight to the PCB. There's a 22uF 250 Volt electrolytic capacitor, and a .1uF metal film two 470K resistors, and one inductor and fuse. There what looks like to be a full wave bridge rectifier circuit using 4 diodes (1N4007) . I tried to power the LEDS using a 12 volt power supply but was unable to make them light.

Mounting the wall washer near your work bench would give you a fair amount of light that is not very harsh. I'm very happy with this purchase.

2 of 2 people found this review helpful. Do you? Yes No  Certified buyer


You might also like